An analytical method for the isolation based on matrix solid-phase dispersion technique and gas chromatographic determination of pesticides in cattle plasma is presented. It was fortified 0.25 g of plasma with pesticides and blended with 1 g each C18 and Na2SO4. The homogenized matter was transferred to a SPE cartridge, which contained 1 g of activated florisil with 5 mL acetonitrile. The analites were eluted under vaccum with 15 mL acetonitrile, the extract was analyzed by gas chromatography-mass spectrometry. The limit of quantification of the method was 0.04 mg L-1 for chlorphenvinfos and fipronil and 0.02 mg L-1 for cypermethrin..

Hidrogéis produzidos a partir de poliacrilamida (PAAm) foram sintetizados e suas eficiências para liberação controlada de NH4+ e K+ contidos em fertilizantes foram avaliadas. Os hidrogéis foram sintetizados em solução aquosa a partir da polimerização do monômero acrilamida (AAm) em duas concentrações (3,6 e 21,7 %), em presença do agente de reticulação N', N-metileno-bis-acrilamida (MBAAm) e catalisador N, N, N', N'-tetrametil etilenodiamina (TEMED). A fixação de nutrientes ocorreu submetendo-se os hidrogéis à solução aquosa com concentrações de 86 e 82 mg L-1 de K+ e NH4+. As propriedades hidrofílicas, espectroscópicas e morfológicas foram investigadas por meio de medidas de grau de intumescimento (Q), por espectroscopia no infravermelho com transformada de Fourier (FTIR) e por meio de imagens obtidas por microscopia eletrônica de varredura (MEV). Os teores de NH4+ e K+ liberados em meio aquoso foram monitorados em intervalos de tempo de 1, 2, 4, 18, 26 e 50 h por espectrofotometria com análise por injeção em fluxo e por fotometria de chama. Os resultados de grau de intumescimento mostraram que hidrogéis com nutrientes fixados são mais hidrofóbicos. Observações em MEV revelaram decréscimo no tamanho médio dos poros para os hidrogéis com maior quantidade de acrilamida. A cinética de liberação controlada de NH4+ e K+ permitiu inferir que o hidrogel sintetizado com 21,7 % de AAm apresentou maior potencial na liberação controlada dos nutrientes, principalmente NH4+.

Hydrogels based on polyacrylamide (PAAm) were synthesized and their efficiency for the controlled release of ammonium and potassium contained in fertilizers evaluated. The hydrogels were synthesized by polymerizing acrylamide (AAm) in aqueous solution at two acrylamide concentrations (3.6 and 21.7 %) using N-N'-methylene-bisacrylamide (MBAAm) as cross-linker and N,N,N',N' tetramethylethylenediamine (TEMED) as catalytic agent. Nutrient fixation was performed by immersion of hydrogels in aqueous nutrient solutions with 86 and 82 mg L-1 K+ and NH4+. The hydrophilic, spectroscopic and morphological properties were investigated based on the swelling degree (Q) and Fourier-transform infrared spectroscopy (FTIR), and images obtained using scanning electron microscopy (SEM). The amount of NH4+ and K+ released in aqueous solution was monitored at intervals of 1, 2, 4, 18, 26, and 50 h by spectrometry, using a flow injection analysis system, and by flame photometry. The swelling degree results show that hydrogels with fixed nutrients are more hydrophobic. SEM images revealed a significant decrease in the average porous size of hydrogels with higher acrylamide content. The release kinetics of NH4+ and K+ allowed to conclude that hydrogel synthesized with 21.7 % AAm had a higher nutrient release potential, especially NH4+.

A decomposição de amostras que contêm elevados teores de Si, utilizando mistura com os ácidos nítrico e fluorídrico, pode provocar a precipitação de fluoretos de Al(III), Ca(II), Fe(III) e Mg(II) durante a digestão, impedindo a recuperação total desses elementos. Visando minimizar esse problema, foram testados quatro procedimentos aplicados a diferentes amostras de solos. O procedimento mais eficiente envolveu a decomposição assistida por radiação microondas, seguida pela separação do material sólido residual com elevado teor de Si do sobrenadante ácido. A fração residual foi solubilizada usando HF concentrado e, após complexação com ácido bórico, essa solução foi misturada à fase líquida do digerido. Os teores de metais nos digeridos foram determinados por espectrometria de emissão óptica em plasma induzido (ICP OES) e a exatidão foi demonstrada aplicando o procedimento proposto em amostras provenientes do programa colaborativo International Soil-Analytical Exchange (ISE, Wegening Agricultural University, Holanda) e em amostra certificada de solo proveniente do National Institute of Standard and Technology (NIST, SRM 2709), que apresentou respectivamente, os seguintes percentuais de recuperação: 100,0 ± 2,6; 99,5 ± 1,9; 108,5 ± 2,7; 94,6 ± 8,9; 92,2 ± 9,7; 95,7 ± 1,8; 96,7 ± 2,7; 95,2 ± 0,6; 103,6 ± 2,6 e 96,1 ± 1,6 para, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, V e Zn.

The use of pre-mixed nitric and hydrofluoric acids for the decomposition of samples containing high amounts of Si can cause the precipitation of Al(III), Ca(II), Fe(III), and Mg(II) fluorides during digestion, reducing the total recovery of these elements. Four procedures were applied to certified soil samples in an attempt to circumvent this problem. The most efficient procedure was based on microwave-assisted acid digestion decomposition of the samples, followed by separation of the residual silicate compounds. This fraction was solubilized using concentrated HF and the remaining fluoride ions were complexed by adding boric acid. This solution was mixed with the liquid phase of the acid digest. Elemental analysis of the acid digests was performed by inductively coupled plasma optical emission spectrometry (ICP-OES). The accuracy of the procedure was confirmed by applying it to samples provided by the International Soil-Analytical Exchange (ISE- Wageningen Agricultural University, Netherlands) and to certified soil reference material from the National Institute of Standards & Technology (NIST, SRM 2709). The following elemental recovery (%) was obtained: 100.0 ± 2.6; 99.5 ± 1.9; 108.5 ± 2.7; 94.6 ± 8.9; 92.2 ± 9.7; 95.7 ± 1.8; 96.7 ± 2.7; 95.2 ± 0.6; 103.6 ± 2.6 and 96.1 ± 1.6 for Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, V, and Zn, respectively.